R9M Slim Case
Description
This case was built to convert a JR R9M into a slim module in order to be used with a FrSky X-Lite Pro TX without having to use bulky adapters. What you see in the picture is a stripped down R9M with all the pins removed and the small board with the switches mounted flush to the main pcb. The screws are the module's stock ones. If you are asking yourself what's that yellow thing mounted on the board and that out of place resistor above the switches board and why this specific R9M can do a 200Hz packet rate then visit [ExpressLRS](https://github.com/AlessandroAU/ExpressLRS).
Statistics
Likes
18
Downloads
0