Compact Buck Converter Box for model LM2596(S)
Description
This is yet another vented buck converter box for model LM2596. This design is smaller than most others, and snuggly holds the module into place. The bottom of the box has cutouts for the exposed pins on the underneath of the board, as well as where the solder pads are located. There are two included files for the lid, one has two cylinders that extend down and rest against the capacitors to firmly hold the board in place. The file "without cap holders" has these cylinders removed, so you can use a small piece of foam to secure the board between the lid and reduce any possible vibrations. With both versions of the lid, the adjustment screw is still easily accessible from the top without the need to remove it. The box can be secured to any surface using a double-sided tape.
Statistics
Likes
4
Downloads
0