A30M geeetech double blower duct
Description
still working on this and currently printing 2nd fix model...hope it works! will switch to PETG and 0.12LH once signed off no supports needed 2 of the stock bolts will be too long if wanting to use plus cannot get two bolts in (one each side) need 4 more M2.5 x 6mm bolts to put in 6 holes....cannot access 2 of them, 1 either side.... printed 0.2 LH 20% infill.......seems to work well...might print with PETG at a later date but seems far enough from nozzle not to melt yet
Statistics
Likes
5
Downloads
0