AD584 voltage reference enclosure
Description
Simple enclosure to protect the battery pins from short circuit. The jumpers, switch and contacts are still accessible. The enclosure provides a stable mount for the AD584 board. Due to the hole in the back, it is still very easy to replace the battery (or simply remove it). There are 2 models included with different mounting options: - 4.5 mm hole for M3 brass inserts - 2 mm hole for self tapping screw The edges are chamfered to make it a bit more practical to hold and handle. The board can be slided in the holder, even with the battery inserted. Fixating the board with mounting screws is optional as with my print the tolerances were already low enough to hold the board in place.
Statistics
Likes
0
Downloads
0