Dovetail Track Nuts (MatchFit Style)
Description
Use these Nuts in hold downs, jigs, work benches and more! Cut dovetail tracks with a router - 1/2" Wide at base, 14° Angle, 3/8" Depth of cut (+/- 1/16") Hardware is all #10-32 Stainless from McMaster-Carr: #10-32 x 1-1/2" Hex Bolts - https://www.mcmaster.com/92314A836/ #10-32 Hex Nuts - https://www.mcmaster.com/91841A195/ Alternate Sourcing Note: the Hex Nuts are 3/8" across the flats while the Bolts are 5/16". Both are 1/8" deep (into the recess). My prints didn't require any glue to hold the fasteners in place. The nuts and bolts audibly snap in place and take some force to remove.
Statistics
Likes
21
Downloads
0