HVAC Vent Air Deflector
Description
Hello folks, This is a floor register air deflector for standard 4"x10" floor registers. This is for use when a floor register/vent gets covered with a piece of furniture such as a couch. This diverter reduces the temperature stratification of air in the room by blowing the air into the open room instead of having it trapped below furniture. If needed there are 6 slots where 1/4" diameter x 1/8" thick neo magnets can be super glued in to help secure to steel registers. The STL is available to print directly (Note need a print height of at least 250mm) and the Fusion360 file has been included if you want to adapt the design. hope you find this helpful! -Cheers!
Statistics
Likes
13
Downloads
0