Yarn swift
Description
Yarn swift to feed a yarn winder. Fits for skein of less then +/- 50-53cm (19-20po) in diameter. Hardware needed : - 1x 606 bearing and M6 screw for the top ring - about 20 small ties wrap, same as those used to hold wires on 3d printer... - 1x screw to fix the rod on the C clamp - 1x 3/4 inches(19mm) diameter wood rod - 6x pop rivets 3/16 diameter for a 1/4 inches pinch thickness. There is 24 arms to be printed, but you can use wood pieces or whatever you like. Length is about 300 mm but could be longer with no problem. Longer arms means skein with larger diameters... Rivets are only needed for the arms tied to the rings. The arms between rays are free... This yarn swift can be used with this winder : https://www.thingiverse.com/thing:4558066 The C clamp and the ring clamp are remix of https://www.thingiverse.com/thing:1673030 __________________________________________________ 2020-09-01 : C clamp body updated for more stiffness and top ring spacer updated for more accuracy...
Statistics
Likes
61
Downloads
0