In-Line Dual TDS Monitor cleated wall mount and hanger
Description
I was tired of the provided velcro adhesive constantly losing grip. This replaces the back casing and will provide a slot to accept one of 2 styles of cleat. One that can screw to a vertical surface or one that can hang off of the RODI framing. Here's a video: https://youtu.be/UUDNiKE_uEk And some pictures: [img]https://i.imgur.com/8LCJYLcl.jpg[/img] [img]https://i.imgur.com/SzzjVsal.jpg[/img] [img]https://i.imgur.com/7uy4NfSl.jpg[/img] [img]https://i.imgur.com/2NSYB8Fl.jpg[/img] [img]https://i.imgur.com/xqPAp6Il.jpg[/img] [img]https://i.imgur.com/oNXHQDJl.jpg[/img] [img]https://i.imgur.com/v30uILol.jpg[/img] I removed the old backing plate and added a new iteration to solve the screw hole problem. EDIT: As I was printing another one for an older TDS meter, I realized that the slot for the wire connector was shorter and slightly over from the first. I don't see any visual difference in the 2 casings except that one has chrome screws and the other has black screws. I doubt that is the case across the board, but I identified the added .stl's as chrome and black. you will have to experiment with both to see what fits for you. I also will provide the measurement from the outer portion of the case to the beginning of the slot so that it can help decide. The chrome screw has a measurement of 10.3mm or 0.405" The black screw has a measurememtn of 8.2mm or 0.322" Hope that helps
Statistics
Likes
9
Downloads
0