GPS RTK Mod for Arctic Hare
Description
Hi all! A back cover for the Ardumower Arctic Hare, carrying a tri-band GPS patch antenna, a 65mm by 92mm metal ground plate and a 22mm kill switch. One of the patch antenna's mounting bolts is used as ground bolt, connecting the metal plate to the battery's negative pole. The cable of the antenna is guided through a cable guide. The kill switch has to be mounted with only one NC contact module as you can see in the picture. This cover can be printed without supports. The clamp for the RTK's pcb is supposed to be printed out of TPU or another stiff, but a little flexing material. It back packs the RTK's pcb to the arduino board. Ardumower project: https://www.ardumower.de Ground plate used: 92mm x 65mm x 0.5mm copper RTK GPS kit used: https://www.marotronics.de/GPS-RTK-WiFi-NTRIP-ArduMower-spezial-Kit Kill switch used: https://www.marotronics.de/Not-Aus-Schalter-Emergency-Stop-Switch-Pushbutton Filament used for cover: SUNLU PLA+ orange 1.75mm and for the clamp: TIANSE Black 3D TPU 1.75mm
Statistics
Likes
4
Downloads
0