Anycubic Mega S Foot Adapter
Description
I realized that upgrading the stepper motor drivers with a tall heat sink was going to cause a couple issues. - The fan mount would have to be bent to accommodate the tall heatsinks thus requiring the removal of the bottom plate - Without the bottom plate there is no way to secure the feet supporting the printer since they screw directly into the plate. I designed these feet adapters to allow the bottom plate removal. They simply slide in place. You can use one of the screws from the bottom plate to secure it in place. You will need four #8 machine screws and nuts however to secure the feet to the adapter. I sliced them in Cura with supports enabled using a .2mm Z gap and a 1mm XY gap for the support interface.
Statistics
Likes
2
Downloads
0