Pi-zero mmdvm case GPS
Description
This is an mmdvm raspberry pi zero case. You need 4x M3x20 and 8x M2.5x5 or something close to that. It also has a place for a 25mm X 25mm X10 fan for overclocked pi zero's or use in a hot environment. The cavity is oversized because of the poor tolerance of cheap fans. Or you can use a fan that is the correct size and use adhesive pads. It also has a cavity built in to house a gps module like this one with the usb connector cut off and wires soldered to the pogo pin pads on the under side of the raspberry pi from the usb dongle. https://www.amazon.com/gp/product/B0716BK5NT/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 I'm not sure what implementation of this works in pi-star, but here it is I made it so I'm sharing it.
Statistics
Likes
0
Downloads
0