E3D Hemera Turbo Blower Mount
Description
Reworked E3d's Hemera Blower mount for my CoreXY Should work with any 3d printer with 15 mm room in front of Hemera Extended mount with more plastic around the holes and to the blower shroud one screw for blower is bevel headed (top left) to mount blower and one screw beveled for hemera Top right hole relocated for hemera mount hole so three screws mount to blower and three to hemera two bottom holes in blower need drilling out to 3mm Added E3D_HEMERA_4010_TurboBlower_Shroud2.stl : more air flow on part and not on HotEnd Don't over tighten stuff, plastic! PetG filament support 20% fill 2 M3x6mm Flat head screws 2 M3x10mm ( you have to grind the heads smaller to fit in cavity of blower) from the 5.5mm to 4.5mm cavity room. I used another screw to hold bolt to grind head (see pictures) If link is dead, search the description 40mm Turbine Turbo 4010 40x10mm Brushless Dual Ball Bearing https://www.amazon.com/Cooling-Turbine-40x10mm-Brushless-Bearing/dp/B088BNRBZV M3 x 6mm Flat Head Machine Screws https://www.ebay.com/itm/M3-Phillips-Flat-Head-Countersunk-Machine-Screw-Steel-w-Black-Oxide-DIN-965/112387002203 M3 x10mm, Socket Head Cap Screws https://www.ebay.com/itm/M3-Socket-Head-Cap-Screws-12-9-Alloy-Steel-w-Black-Oxide-DIN-912-0-50-Coarse/112842465163
Statistics
Likes
2
Downloads
0