Fleshlight Launch Mount & Funnel
Description
This is a VESA100 mount for the Launch. Combine with a swing arm monitor mount. To gain a fairly effective, and adjustable Launch Experience. A retainer ring makes it much harder to push the Bluetooth button by accident. These are optimized for use with Bluetooth, the local controls are very difficult to use. The Funnel is to solve a particular problem of adding more moisture while in use. Instructions: To Position the mount the retainer ring, it's keyed to two indents on the body, dry fit, line up all the holes, mark out the position for the mounting tape. A Couple of strips of Clear Mounting Tape will attach the vesa plate. A Couple of Machine Screws/Bolts will mount the retainer ring. 4 Screws, Washers, & Wingnuts will mount to the swing arm Note: This is a work in progress, but is currently good enough for my equipment. If you wish to improve on the design I've included the fusion 360 files. I only ask that you pm the updated designs back to me. Parts List (4) 1/4-20 x 1/2" Bolts with wing nuts and washers. (2) #10-24 x 5/8" Machine Screws (hex drive, square, or philips fine) (12") Scotch or Gorilla Clear Mounting Tape (1) 1 VESA Swing arm (used or new) I found this, or something really similar on FB-Market, a little ingenuity should solve any distance problems. https://www.amazon.com/dp/B07Z7YNCBW/?coliid=I1I682A0OX48HS&colid=FB56Z54CAXXS&psc=1&ref_=lv_ov_lig_dp_it If you need assistance feel free to PM
Statistics
Likes
6
Downloads
0