Digitakt / Poweroak case Case
Description
This is a little wooden case made for the Digitakt and the poweroak K2 power supply. It can probably power the Digitakt for ~15 hours. Great for lounging around the house and making beats! The uploaded SVG is intended to be cut out of 1/4" plywood, and the three pieces glued to together make one side. Mine was cut on a cnc machine with 1/8" endmill. The dowels are 1" diameter pine. The dowel collars are made from 1/2" hardwood - not sure what kind, it was some scrap I had laying around. I sunk some M3 metal inserts into the dowel ends to so that I could remove the left collars if I wanted to take out the battery. I just glues the collars on the left into place. Once assembled I have a zip tie strung across the top putting downward pressure so that the Digitakt presses into the lip of the case, this keeps it from falling out when turned upside down.
Statistics
Likes
1
Downloads
0