5" Drone Frame inspired by ImpulseRC Apex (Mr. Steele)
Description
Quadcopter frame, designed to be 3d printed and inspired by the Apex frame from ImpulseRC. Print queue: 4x arm.STL 2x armbrace.STL 1x bottomplate.STL 2x camholder.STL (one needs to be mirrored) 1x midplate.STL 4x standoff.STL 1x topplate.STL 1x vtxholder.STL Required Hardware: m3 hardware: threaded rod (4x60mm, 2x35mm), 28 nuts, 4 screws 15mm long m5 hardware: 8 nuts, 8 screws 16mm long Depending on your ESC / FC combo you might need spacers between them. !!!! BE PREPARED TO GET FLYAWAYS! YOU NEED A GYRO NOTCH FILTER AT ~100-120Hz!!!!
Statistics
Likes
16
Downloads
0