The Panzer : Bondtech BMG + V6 / Volcano / MK8 / Microswiss print head for Creality CR-10 and Ender3 (a remix of "The Tank")

Description

Thanks to the original creators Greg191134 and techoutreach for their work. This model and is based on techoutreach's version with a few tweaks. Like techoutreach's version, you can change the hotend without removing the BMG extruder. - There's a new Fan Shroud with better visibility on the nozzle (Thanks to Günter Michaeller for his idea) - You can mount a 8mm Endoscope using the new fan shroud [8mm endoscope on AliExpress](https://s.click.aliexpress.com/e/_dTIiM48) - V6 Volcano is supported (the blower fan and the shroud can be lowered and there's a spacer for the BLTouch) - There's a MK8 Version (Not tested but should work) and an "adapter" too to convert the V6 mount to allow mounting temporarily an MK8 - You can choose with or without Heat Inserts - M3 x 3mm x 4mm : [YUBABA Store on AliExpress](https://s.click.aliexpress.com/e/_dXBhG7I) - M3 x 12mm x 4mm : [YUBABA Store on AliExpress](https://s.click.aliexpress.com/e/_dXBhG7I) [Everything is designed with OnShape, feel free to modify it !](https://cad.onshape.com/documents/f55dd69f013fed730ac71e9d/w/ee60090a0bf9d797ec41b368/e/9bf9d1bdafd4bb68a462d64f) #### Marlin configuration ```c #define NOZZLE_TO_PROBE_OFFSET { 32, -2, 0 } ``` #### Printing The design is quite forgiving, especially using heat inserts, I printed it with good results in ABS, using a 0.6mm nozzle, 0.35mm layer heights, 4 perimeters (0.65 line width => 2.6mm shell), a 10mm brim and a bit of hairspray. I included a `.3mf` project file of the last print settings I used, your milage may vary. You can open it using SuperSlicer: https://github.com/supermerill/SuperSlicer #### Changelog: V7: Added an optional 8mm endoscope holder to the new fan shroud. V6: Trimmed a bit the new fan shroud to make it more suitable for MK8 heater block. V5: Initial release #### Bill of materials: ##### Screws - 3 x Hex screw M3x0.50 x 8 - 4 x Hex screw M3x0.50 x 35 - 1 x Hex screw M3x0.50 x 22 - 2 x Hex screw M3x0.50 x 20 - 5 x Hex screw M3x0.50 x 16 - 2 x Plain washer M4 See here if you need screws: - [YUBABA Store on AliExpress](https://s.click.aliexpress.com/e/_dZ5mN56) - [OG House Improvement Store on AliExpress](https://s.click.aliexpress.com/e/_dS0CCSu) ###### With Heat Inserts - 1 x M3 x 12mm x 4mm - 9 x M3 x 3mm x 4mm

Statistics

Category

Tags