Low Poly ESK8 Wall Mount
Description
My take on an low poly skateboard / longboard / esk8 / electric skateboard wall mount. Pre-rotated for optimal strength, recommended at least 3 outlines and 20% triangular or grid infill. Flat head screws are recommended for mounting but countersunk screws can be used in combination with a washer (photo). Do not use countersunk screws without washers as it will cause the print to split. Should work with wheels up to 105mm, the board in the pictures has 90mm wheels. PRO TIP: Use a piece of clear packing tape to prevent the back wheels from messing up the wall (photo).
Statistics
Likes
12
Downloads
0