Xbox 360 Power Connector Shell
Description
I Upgraded My Printrbot Simple Metal To Use An Unmodified Xbox 360 Powersupply, Since It Puts Out ~16.5A @ 12V. You Will Need To Harvest The Connector Out Of An Xbox, Then Solder Wires Onto The Leads. Keep The Screws For Mounting The Connector To This Part. There Are 3 Files Here, You Only Need To Print The "Topshell" And The "Botshell". The 4 Mounting Holes Are Recessed For 2.5Mmx8Mm Allen-Head Bolts.
Statistics
Likes
9
Downloads
0