Hemera Aluminium adaptor plate, CR-10S Pro
Description
Important Note, Hemera fixing bolts should not protrude past the mating surface more than 3mm (+- 0.2mm) 3mm aluminum adapter plate for E3D Hemera, This plate can be laser cut or done with hand tools. I have included .dxf file with 2 options. Hot end mounting posts will need to be filed down flush with the adapter plate (3mm) Existing wheel bolts can be reused, the inside bottom corner of the heat sink fan needs to be filed to clear the bolt head. After fitting the adapter plate to the stock hot end bracket, a 3mm hole will need to be drilled through the stock bracket for the Hemera’s top left fixing bolt. Also included are, Drilling guide .stl BL touch mount .stl Depending on my spare time and the interest shown in the design I will add more cable options and ABL probe mount options. See my original design for more general fitting instructions https://www.thingiverse.com/thing:4099686 https://www.thingiverse.com/thing:4550007 Ender 3, CR-10 mount https://www.thingiverse.com/thing:4564423 If you find my files useful please consider giving me a tip. If you alter or remix my design please credit me with the original design.
Statistics
Likes
15
Downloads
0