Thin laptop camera cover
Description
Thin laptop camera cover. Dimensions: 30mm, 6mm, 1mm. Maximum camera diameter: 4mm Side bezels: 1mm Best result with 2mm nozzle 0.5 mm layer height, but can be printed with 4mm nozzle 1mm layer height. 1.Don't remove from the build plate until cooled down, otherwise it will deform. 2.Clean the laptop surface. 3.Apply light glue or double-sided tape to the base part. Make sure the moving part is not glued as well. 4.Enjoy your favorite content !
Statistics
Likes
0
Downloads
0