CR-10 S5 / S4 Frame Brace
Description
This is a quick and simple brace for the Creality CR-10 S5 I whipped out to use 1/2" OD cylindrical aluminum tubes I already had (13mm). You need 2 brackets for the top frame of the X-axis with M5s and T-Slot nuts and then 4 couplers. Two bolted also with M5s to the brackets and 2 that are bolted to the X-Axis down at the front also with M5. (You will need to tap those threads). I've printed mine in PETG and they are plenty strong.
Statistics
Likes
2
Downloads
0