Waste basket
Description
Just a simple waste basket, which I keep next to the printer to discard supports, print skirts etc. Print the body "Bin.stl" in **vase mode** with line thickness of 0.5mm (it's ok even if nozzle is 0.4mm). Then print the "Top Edge.stl" normally, with infill to your preference. It's designed to be printed without supports. The purpose of this part is to make the bin more rigid and durable. Once printed, slide the edge part onto the top edge of the bin and then apply a few drops of superglue into the slit between them.
Statistics
Likes
9
Downloads
0