Flir Tau 2 Thermal Camera Tilt Mount for Mic Stand/Camera Thread and WFOV Focus Tool
Description
A tilting mount that fits a Flir Tau 2 thermal camera core and mounts to a mic stand (american thread). Also includes a WFOV focus adjust tool that is hollow so the camera can see through it while focusing. Also includes an M8 sized nut and bolt, but since the fit was tight on mine (slightly overextruded, but a fine pitch to print threads even at 125um), I opted for a standard metal bolt so it was easier to torque down and back out if needed. Update 1.1: Added a base for the camera core that will screw into a standard 1/4" 20 TPI threaded camera mount as well.
Statistics
Likes
3
Downloads
0