Ultimaker 2go - Ultimaker 2+/3/S5/S3 feeder adapter
Description
This is a simple spacer to put a um2+/um3/(maybe) S5/S3 type feeder onto a um2go. Lets be honest the um2 non geared feeders are not great I had the part so I wanted to use it. If you use S5/S3 type feeders you might need to add a divot under the center of the large gear, the feeder footprint should otherwise be the same. you can get access to the cad here: you can get an onshape account for free. https://cad.onshape.com/documents/babb752287b2d5b9ebbcde25/w/002a932573e848e6b80f2a57/e/7f6d98a1ba283413d95dac7d The um3 and um2go parts used in the CAD came from the Ultimaker github and were used for reference. You might want/need to print the small gear as well, so that's included but it's a straight copy of the original from the ultimaker github https://github.com/Ultimaker/Ultimaker3/blob/master/1969/1969-G/1969-G.STEP which is licensed under https://creativecommons.org/licenses/by-nc/3.0/
Statistics
Likes
1
Downloads
0