KTM Adventure 1190 (2013-2016) Windshield riser adapter
Description
This is a KTM Adventure 1190 (it should fit 2013-2016 models) windshield riser. It raises the windshield 6 cm. The original mechanism to adjust the windscreen works no problem. M5x25mm screws Plastic 3mm thick 12mm diameter washer/spacers for the windshield holes. Raft used because PETG likes to contract and lift from the bed. I'll post installation pictures soon. My print settings: Print flat side down. adhesion_type = raft layer_height = 0.12 material_bed_temperature = 70 support_enable = True bottom_layers = 9 cool_fan_speed = 50 infill_pattern = grid infill_sparse_density = 45 material_print_temperature = 230 retraction_amount = 5.5 retraction_speed = 50 speed_print = 75 support_angle = 72 support_bottom_density = 60 support_bottom_height = 0.36 support_bottom_pattern = concentric support_infill_rate = 15 support_interface_density = 75 support_interface_height = 0.36 support_roof_density = 60 support_roof_height = 0.36 support_roof_pattern = concentric support_wall_count = 0 support_xy_distance = 1.2 support_z_distance = 0.24 top_bottom_pattern = lines top_bottom_pattern_0 = concentric top_layers = 9 wall_line_count = 8
Statistics
Likes
4
Downloads
0