SodaMagic Boottle Cooler
Description
A cooler for SodaMagic Bottles. The original base of the bottle needs to be taken off before inserting into the cooler. The cooler has nobs on the bottom to lock the bottle in place and prevent spinning. Printing instructions: I used Prusa Slic3r to apply a 15% infill for the bottom 1cm of the cooler and a 5% infill for the rest to have as much air as possible for better cooling and also optimize print speed. After printing, please take a 200 grit sandpaper and polish the inside a bit for a smoother fit. A filled bottle should slide nicely into the cooler with the air coming out of the holes in the base.
Statistics
Likes
1
Downloads
0