Filament dust filter - Sidewinder X1
Description
Designed to Fit nicely on the short ptfe guide tube, and I designed to be used with a short length on top, its not really necessary but I like how it guides it in. I used a piece of filament cut on a 45 to clean up the inner 2mm hole as it doesn't have any support it it didn't print the best but a couple passes with the filament and it was good to go. The cap should fit snug but not too tight that its easy to remove to switch or clean. due to the nature of the narrow base I printed with a brim to be safe. If you need you can add a drop or two of mineral oil to the sponge for lubrication of the filament as it passes through,
Statistics
Likes
5
Downloads
0