Redcat Gen 8 & 7 Shock Spring Retainer
Description
Shock Spring Retainers for the Redcat Gen8 and Gen7 stock shocks. There are 2 styles, one clips on the shock and has a hole to use a wire to secure it in place to prevent loss (not required) the other you unscrew the bottom of the shock to install. We lost one and could not find a replacement to buy so i designed these as replacements. PLA will work fine, I printed them in ABS as pictured. Should fit any 3mm shock piston with a 16mm spring.
Statistics
Likes
6
Downloads
0