Edgun and HW100 Probe Dust Cover Insert
Description
This is a simple probe dust cover insert to help keep debris and dirt out of the filling port on Edgun rifles. I designed this for my Edgun Matador R3, but it will probably fit other Edgun rifles too. It requires an o-ring, the same size as the ones on the filling probe itself so you probably have spares. If you don't have any I think they are 5mm x 1.5mm but I could be wrong. This should also fit the HW100 as the probes are the same size. Note: There is a small 1mm hole through the middle of this plug, this does two things: 1. It allows you to put a piece of string through there to make it easier to remove or act as a windicator 2. If your fill valve ever fails it means the plug won't shoot out as pressure builds.
Statistics
Likes
9
Downloads
0