Hobbywing push-button power switch mount for Arrma 6s Kraton/Notorious/Outcast/Mojave/Senton
Description
<b>Updated 11/12/2020</b> <i>-Renamed original file and added an alternative file to mount the switch vertically on the front of the tower. Vertical mount intended for those using aftermarket center differential mounts which have clearance issues with the horizontal mount.</i> <b>Description</b> These mount is designed for push-button style power switches found on 1/10, 1/8, and 1/5 scale brushless Hobbywing ESCs (EZRUN Max series, XERUN XR series) and mounts onto the Arrma 6s (Kraton/Notorious/Outcast/Mojave/Senton) vehicles onto the side of the center roof/roll cage support (Part #ARA320273). <b>There are two versions of this mount, see description below</b> -<b>Horizontal Mount</b> = Mounts in center of center roll cage with wire coming out of the switch facing down. This works perfectly with the stock differential mount cover. -<b>Vertical Mount</b> = Mounts on the front side of the roll cage with wire coming out of the switch facing the front of the vehicle. This version works best with aftermarket center differential mounts/covers. <b>Installation</b> To install you will need (2) M3x16mm or longer countersunk screws, the OEM screws will not be long enough to secure once removed. Tip: The power button is fairly secure while in the mount, but if you want 100% confidence that it's not going anywhere use a zip tie around the button to lock it in place. Note: This style of power switch is also found on Hobbywing rebranded ESCs such as those by HexFly and Dynamite.
Statistics
Likes
31
Downloads
0