Hobbywing Max6 ESC mount for Arrma 6s vehicles
Description
This mount/adapter tray allows you to attach the Hobbywing Max6 ESC using the (4) screws on the bottom of the esc and then secure the mount to the onto the Arrma 6s vehicles equipped with the stock ESC mounting tray (Part# ARA320430). This tray is found on the Arrma 6s Kraton, Notorious, Outcast, Mojave, Typhon, Talion, and Senton only and will NOT work with the Infraction/Limitless/Felony. For a mount that works with these other vehicle see my other listing: https://www.thingiverse.com/thing:4495981 Install: Line up the 4 holes on the bottom of the Max6 esc with the 4 holes on the mount making sure the "Arrma" logo is facing the bottom of the esc and secure with (4) M3x6mm countersunk screws (be sure you face the motor wire plugs to the rear for a better install, see pictures for examples). Next you will need to trim off the plastic edge lip on the arrma ESC tray so the tray is completely flat on top, then attach to the tray using (3)M3x6mm screws with the holes that line up with the tray screwing them in from the bottom of the tray. Once mounted to the tray reinstall the tray as normal in your chassis. The ESC should be flush with the side guards of the chassis once fully installed. **Note: This mount also works with Hobbywing Max6 rebranded ESCs such as the Hexfly Hex6***
Statistics
Likes
31
Downloads
0