PEX drop tubes for openBulletFeeder
Description
PEX drop tube parts for the open bullet feeder by AmmoMike83 replaces the coil springs using Tom Penn's quick detach fittings and drop tubes. Uses 3/8" and 1/2" PEX 3/8" tested .224 and .309 1/2" tested .356 and .451 For feeder side QD parts print chute_adapter_new by tom_penn https://www.thingiverse.com/thing:3207921 Small_top_DT (remix) Large_top_DT (remix) Fixed feeder side print PEX_cone_small PEX_cone_large Press side print Required XXmm_drop_tube_v2 by tom_penn https://www.thingiverse.com/thing:3207921 Small_DT_QD_0 (remix) Large_DT_QD_0 (remix) Chamfer the inside of your PEX pipes. This is my first upload, so I hope I got everything right. Parts were printed, then edited again for a couple small problems. So these files have not been tested. Also note I do not have a AP or 650 to test how far the PEX will bend. Please let me know if a bend in the drop tube fitting is needed.
Statistics
Likes
4
Downloads
0