Gloomhaven Jaws of the Lion Organizer
Description
This organizer is designed to print with a .8 nozzle .4 and .2 will work fine as well. The box is is not overly tight. I've allowed about .5 to 1.0mm play between all the boxes so make sure you have esteps and flow correct. Your printed walls should be 1.6mm thick on the outside and .8mm thick on the inside. If using a .8 nozzle enable Print Thin Walls. Watch my youtube video 6-mins to show how it all goes together before you print anything. https://youtu.be/Zmkq9IGMbLs Print the following pieces. 2x Character Tray 2x Character Tray Mirrored (Do this with your slicer) 1x Large Card Tray 1x Monster Tray 1x Small Card Tray 1x Stand Tray 1x Token Tray 1 1x Token Tray 2 ****I've added Monster Tray Split 1 and 2 for smaller format printers they are only printed if you can not fit the Monster Tray on your print bed. On an Ender 3 the Monster Tray will fit you need to turn off Build Plate Adhesion ie. Skirt or Brim**** Feel free to post your questions. Update based on Comments and some faqs. I use this app https://play.google.com/store/apps/details?id=com.esotericsoftware.gloomhavenhelper&hl=en_US There are some remixes available of the different trays check them out. Also I really like these sleeves for the small cards https://sleevekings.com/collections/sleeves-by-skus/products/sleeve-kings-mini-euro-card-sleeves-45x68mm-110-pack-60-microns-5 They are about halfway between a penny and a premium sleeve in thickness and leave pleanty of room in the card trays if you wish to do something fancier like dividers for the monster cards. They also fit better than FFG that seem to have a lot of extra sleeve at the top.
Statistics
Likes
55
Downloads
0