Voron Afterburner Direct Drive Mount for CR-10/Ender 3/etc.
Description
This is a modified mount for the Voron Afterburner to mount it to a CR-10/Ender style printer using a single 400mm MGN12H linear rail. It is modified from the new Voron Switchwire printer that just came out. It uses the same design with a single linear rail instead of the two like the larger Voron. I removed the probe and moved the whole extruder as close a possible to the linear rail. It looks like the x endstop can just be flipped to the other side. I will have to test this as it comes pretty close to touching the linear rail carriage. A small spacer might be needed. I uploaded the entire step file since it's still a work in progress. You can open it in Fusion 360 if you want to play around with it. <strong>Notes:</strong> Some of the screws will need to be a smaller size from the original Afterburner to accommodate for the smaller mount. I will add the updated screw sizes on here once I get mine built. <strong>Updates:</strong> 10/21/2020 : I have everything printed and working. I'm doing some testing and configuring. I'm currently working on the cable chain mount. <strong>Marlin settings</strong> X_PROBE_OFFSET_FROM_EXTRUDER 35.57 // X offset: -left +right [of the nozzle] Y_PROBE_OFFSET_FROM_EXTRUDER 10.6 // Y offset: -front +behind [the nozzle] Z_PROBE_OFFSET_FROM_EXTRUDER -2 // Z offset: -below +above [the nozzle] // Travel limits (mm) after homing, corresponding to endstop positions. X_MIN_POS -30 Y_MIN_POS -20 <strong>Please help support my designs by using the affiliate links below:</strong> <strong>Harware Changes (so far):</strong> 4 M3 x 6mm screws to hold the carriage to the MGN12 carriage. <a href="https://www.amazon.com/gp/product/B07VT199JR/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07VT199JR&linkCode=as2&tag=mylearninglab-20&linkId=1475c377979cbd1a9fba60f5da169dac">Amazon Link</a> <strong>Linear rail links</strong> Amazon: <a href="https://www.amazon.com/gp/product/B07VT199JR/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07VT199JR&linkCode=as2&tag=mylearninglab-20&linkId=1475c377979cbd1a9fba60f5da169dac">https://www.amazon.com/gp/product/B07VT199JR/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07VT199JR&linkCode=as2&tag=mylearninglab-20&linkId=1475c377979cbd1a9fba60f5da169dac</a> AliExpress: <a href="https://s.click.aliexpress.com/e/_dWCMtDt">https://s.click.aliexpress.com/e/_dWCMtDt</a> <strong>Stepper motor</strong> <i>The stepper motor must have a shaft length of 20mm like the ones below.</i> Amazon Links: <a href="https://www.amazon.com/gp/product/B07VT199JR/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07VT199JR&linkCode=as2&tag=mylearninglab-20&linkId=1475c377979cbd1a9fba60f5da169dac">STEPPERONLINE Stepper Motor</a> or <a href="https://www.amazon.com/gp/product/B07VT199JR/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07VT199JR&linkCode=as2&tag=mylearninglab-20&linkId=1475c377979cbd1a9fba60f5da169dac">STEPPERONLINE Stepper Motor with connector</a> AliExpress: <a href="https://s.click.aliexpress.com/e/_eK9BtX">STEPPERONLINE Stepper Motor</a> or <a href="https://s.click.aliexpress.com/e/_et21zJ">STEPPERONLINE Stepper Motor with connector</a> <strong>BMG Extruder</strong> <i>You will need all of the internal parts from the BMG for the Afterburner</i> <a href="https://www.amazon.com/gp/product/B07VT199JR/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07VT199JR&linkCode=as2&tag=mylearninglab-20&linkId=1475c377979cbd1a9fba60f5da169dac">Amazon Link</a> <a href="https://s.click.aliexpress.com/e/_eL5lhr">AliExpress Link</a> <strong>Brass Hot Melt Inset Nuts - M3 x D5 x L4</strong> I had to get mine from the link below, because the ones I got on Amazon were not the correct size. <a href="https://s.click.aliexpress.com/e/_9xGRkj">Aliexpress link</a>
Statistics
Likes
185
Downloads
0