Airsoft Flash Hider and Mock Silencer Remix
Description
This is a remix of magno23's "Airsoft Flash Hider and Silencer" project. I reduced the length of the flash hider to 70mm (2.7") total. I extended the mock silencer component out to 163mm (6.4") total. The lengths I adjusted it to were just random spitballs to make it look more appropriate on my SCAR-L airsoft gun. STUFF ABOUT THE THREADS: -The threading on the FLASH HIDER is 14mm CCW. This means left is "tight" and right is "loose". G&P M4's are the only AEGs I'm aware of that have 14mm CW (right = tight, left = loose) threads on the muzzle, but there are probably others. If your gun has 14mm CW threads, don't print this for it. -The threading on the MOCK SILENCER is CLOCKWISE. This means right = tight, left = loose. -If you want to paint the flash hider and mock silencer, make sure not to paint the threads, otherwise they'll bind up and eventually adhere to each other. I just covered the threads of mine in painter's tape and hit the rest with Rustoleum paint + primer and then a clearcoat.
Statistics
Likes
43
Downloads
0