Sculpto Pro 2 / Sculpto+ Extruder Filament Lever
Description
I was inspired by snyderspindles’s mod but wanted to go further with making filament changing and extruder disengaging even easier. Here is the result! The current versions were NOT printed on the Sculpto, they were printed on my other printer using lots of “expert mode”-only settings. I will make another post when I have versions of this that can be printed with Sculpto’s cloud app on a Sculpto, so you don’t have to worry about expert mode slicing. Settings I printed with: 0.6mm nozzle, eSun white PLA+, 215F, 3 layer walls, 3 layer top/bottom skin, 25% Cubic infill, heated glass bed, Cura tree supports, on my modified Alunar M508 I cannot guarantee these early versions will print properly on the Sculpto, I’ll work on that next. You’ll almost certainly need to use the strongest infill setting though. This design reuses the spring and the metal roller from the original extruder. It also requires a 20mm M3 screw and a nut. You may want a drill and a hand file to smoothen the surfaces or enlarge holes. As usual with mods, print at your own risk, this design is not officially endorsed by Sculpto
Statistics
Likes
34
Downloads
0