Rolleicord V (1955) Cold Shoe
Description
The Rolleicord V (1955) is a great companion and I use it often, but it lacks a cold shoe that can hold a light meter or a small flash. This became quite evident when the Reveni Labs light meter arrived, so I made one suitable to hold the Reveni Labs light meter but also my old Voigtländer VCII meter. The parts are named as follows: RCS part 1.stl - this will have contact with the camera leather and make sure the cold shoe stays in place. RCS part 1 alt.stl - This alternative part will not touch the camera leather but may be a bit wobbly on one axis. RCS part 2.stl RCS part 3 Reveni.stl - use this one if you have the Reveni meter. It will have a nice fit. RCS part 3 VCII.stl - use this one if you have the Voigtländer meter or if you want to use a small flash Additional parts needed: Flat head M3 screw, 4 mm long, e.g. a computer screw https://www.inet.se/produkt/4301308/skruv-for-harddisk-20-pack?gclid=CjwKCAjwm_P5BRAhEiwAwRzSOzMHU-HgVJ22d1chPJwN4CPkcZpYjLig7FTxXSNvB7NPm9o0kazQuhoCbAcQAvD_BwE NOTE There are variations of the strap lugs so please let me know how it fits your TLR camera.
Statistics
Likes
10
Downloads
0