Memory Card Tower/Holder (PS1/PS2/GameCube)
Description
I printed these in 0.3mm height all in one go - which took around 4 hours to complete a full set. Result snaps together perfectly, and holds the MC's in place for easy storage. Enjoy! <b> Update 3/4/2021 </b> I have Added Extension pieces you can print, to infinitely scale the Towers to your memory card needs! You still need the Top/Bottom, and regular L/R pieces. But you can now print the EXT files, to go between the normal L/R files and the Top part. Also fixed a fail I had in the GameCube version, where one of the inner support pieces (bottom one) wasn't symmetrical (visually driving me crazy, sorry if you already printed it!) <b> Update 2/12/2021 </b> Added an updated version that adds support for the GameCube as well! Uses the same Top/Bottom as the PS versions, but requires different L/R sides to be printed.
Statistics
Likes
28
Downloads
0