HeroYouMe CR-10s Pro Fan
Description
This is a remix of the frequently used "HeroYou" hot end base and fan shroud that was modeled after the popular "HeroMe" style. This remix features a few tweaks in order to better fit onto a CR-10s Pro V2. It is highly suggested that prior to install, the fan shroud be mounted onto the base first, the two mount screws on the base be pre-threaded, and the four hot end fan screws are inserted to start the threads. Doing so aids greatly with the install. Note: be cautious with the base part as the fitment is a bit tight with the hot end elements passing by the top of the part. Print settings (Cura 4.6): - Material: PETG - Part cooler: OFF - Infill: 100%, Gyroid, .4mm infill line distance - Shell: 6 wall lines - Supports: Touching build plate only, 60 Degree angle - Speed: 50mm/s - Layer height: .25mm - Bed temp: 75c Initial/ 70c normal - Nozzle Temp: 248 (yours may vary) Refer to the PNG file for model placement on the print bed (image taken from source).
Statistics
Likes
2
Downloads
0