Case for custom MSX 50 to 60 pin adapter
Description
Here you can find the models of the cases for the custom 50 to 60 pin adapter that allows to connect side slot MSX devices to the standard 50-pin slot. The original converter was developed by ImATrackMan and was sold here: https://www.msx.org/pt-br/node/50619?page=0 The models include the upper and the lower parts of 2 different cases - the cartridge case and the 60-pin extender case. Also included are the models with their top layers covered by the 0.2mm polygon. Such models have "noholes" string in their names. This method ensures the high quality of the top and the bottom surfaces of the printed models as the printing head is not moving around when printing the first layer. The necessary holes can be cut later with a sharp knife. The screw holes can be opened by gently inserting a Philips screwdriver into them. If you want to make a small donation in appreciation of my humble efforts, please use the "Tip designer" button on this page: https://www.thingiverse.com/Wierzbowsky/designs
Statistics
Likes
0
Downloads
0