5 band cobweb wire guides
Description
A set of wire guides suitable for 16/0.2mm wire (2mm holes) that I used to locate the wires in my 5 band G3TXQ cobweb design described here: https://g1ybb.uk/g1ybb-disguised-ultralight-cobweb-antenna/ The clamp on rather than screw through so do not weaken the fibreglass spreaders. also the wires pass freely through the guides so can equalise the tension in the loop across all spreaders. They just need an M3x12 pan head screw and ideally a nyloc to be able to nip up securely but not crush. Could be used for any other similar project. Printed in PLA+, standard settings, no supports. Tube sizes they fit (will squeeze bit smaller): 10m = 16.5mm 12m = 14.3mm 15m = 13.0mm 17m = 11.4mm 20m = 8.5mm
Statistics
Likes
3
Downloads
0