IoT Fingerprint Scanner w/ OLED
Description
__Please visit the below at EverythingSmartHome.co.uk for details.__ __[How to article](https://everythingsmarthome.co.uk/howto/how-to-build-a-wifi-connected-fingerprint-sensor-with-home-assistant/ "Title")__ __[How to article](https://everythingsmarthome.co.uk/esp8266/adding-an-ssd1306-oled-display-to-any-project/ "Title")__ This is an enclosure to house an FPM10A fingerprint sensor, Wemos D1 Mini, and 0.96" SSD1306 OLED panel. _Parts required:_ FPM10A Fingerprint sensor: [such as this one](https://www.amazon.ca/Semoic-Fingerprint-Optical-Communication-Interface/dp/B07RV82LPK/ref=sr_1_3?dchild=1&keywords=fpm10A&qid=1625428457&sr=8-3) Wemos D1 Mini: [such as this one](https://www.amazon.ca/gp/product/B07WWFND3B/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1) SSD1306 OLED: [such as this one](https://www.amazon.ca/Display-Module-SSD1306-Du-pont-Arduino/dp/B07VDXYDVY/ref=sr_1_4?dchild=1&keywords=SSD1306+OLED&qid=1625428200&s=electronics&sr=1-4) Note these fingerprint sensors come in 2 configurations for the circuit board - either behind or to the side...this was designed to work with the former. Print using included STL's, Print parts flat with support. Recommend dense support near contact surfaces ~75%. Fusion360 source file included for tinkering. Arduino sketch: https://github.com/luckypants123/fingerprint-mqtt
Statistics
Likes
14
Downloads
0