Palette Pro Transition Test Block
Description
I'm no expert in this Palette witchcraft so I make no claim that this is a good calibration print or in any way replaces what has been the standard calibration/learning process. The benefits I see are: - Focus on simple transition after your pings are good. - Check for color bleed for color sections and adjust to transition length if necessary before starting a long print. - Check for deviation between processes (for me this is purge block vs side purge and hub vs SD card). - There is a 45 degree angle so that you can inspect overhang quality. - Dimensional check. The block is 1" square with each color being 1" square x .200" tall. The center hole is 0.5" in diameter. - Center hole can quickly identify any layer shifts. - Evaluate stringing in the center hole and across the overhang. - I made it five layers so I could experiment with changing filament to get five colors. - 5 slices / 5 pings quick and easy print (about the same time as printing the keychain). - Might be a good calibration to run before the earphone holder to see if transitions are good before having multiple colors on the same layer or short distance between splices.
Statistics
Likes
1
Downloads
0