Sapphire Pro / Plus Hemera mount for EBM Pabst RLF35
Description
This mount should is just the same, as the Sapphire Pro/Plus Mount from mordant80, but I remixed the fan duct to work with a EBM-Pabst RLF35, since they are used qute cheap around here. Still experimenting with the flow-rate. 95% seems to be best. This Mount worked best on my dual Z-Endstopps Sapphire Plus. By this revision, your going to reduce your Z-Height (350mm to 327mm) and your X-Axis (300mm/310mm to 292mm) a little bit. The RLF is quite strong. I recommend to run it with up to 50% RPM only, since the heater cant keep up :-). *********************************************************************************** **Used Firmware for Hemera:** Those firmwares are preconfigured and (at least tested for the Sapphire Plus). The first one is using the standart Marlin UI. The Second one the lvgl UI, the Sapphire came from the factory with... https://github.com/RolfZuckowskiUltras/Marlin-2.0.X-MKS-Robin-Nano https://github.com/RolfZuckowskiUltras/TwoTrees-Sapphire-Pro-Plus-Marlin2.0-with-GUI/
Statistics
Likes
28
Downloads
0