Airsoft Vector Optics Maverick Killflash/Protector
Description
Designed for Vector Optics Maverick Gen. II. A 2mm polycarbonate piece optionally goes in first, and then the killflash screws on, keeping it firmly in place. Rotate 180° before printing. Version 3 (recommended): - Print maverick-protector-v3 directly - Or follow the instructions for the V2, using the v3 version of the infill instead. Version 3.1: - Added friction-fit mount for polycarbonate piece at the back side of the optic. --- Version 2: I wanted to modify this slightly but I got fed up with all the miss-generated meshes. So I decided to use the slicer to create the honeycomb pattern instead. To print the v2: - Add maverick-protector-v2-casing.stl to table - Add maverick-protector-v2-{infill,thread}.stl as sub-part - Set 'infill' sub-part to zero bottom/top shells & honeycomb infill (I used 25%) - Rotate 180° (all together) - (See maverick-protector-3.jpg)
Statistics
Likes
6
Downloads
0