DJI Mavic Mini ultimate large phone holder + Visor
Description
I decided to build my own custom clamping style fully adjustable large phone holder for my Samsung A71 phone so I wouldn't have to take off my case and squeeze my phone between the clamps every time, also wanted a sun visor. You will most likely have to modify the width of the tray to fit your exact phone which shouldn't be very difficult. The hinge uses a 3mm rod. Print with all supports except for visor. The parts are oriented how they should be printed. Remember to use a support blocker inside the tray hole so you don't get stuck with a piece in there. Supplies / Important information: Visor can be 10% infill the rest should be 100% for strength especially the top section. USB cable at least 15cm (stock will not reach) https://www.aliexpress.com/item/4000156547707.html?spm=a2g0s.9042311.0.0.16e44c4dQPYzev 3mm Rod M4 Bolt and Nut Super glue for the knob and mount insert labelled GLUE. Foam for snug fit https://www.youtube.com/watch?v=YuEjX9pyjtA
Statistics
Likes
10
Downloads
0