Bat Cup Insert
Description
# Bat Cup insert organizer **This is a work in progress.** Insert for the BatCup boardgame. It fits inside the original cardboard insert and holds the base Kickstarter edition. It leaves space for one or two additional circuits. The full set is composed of: * 8 x CardBox.stl * 1 x PitStop.stl * 1 x Climate.stl * 1 x Explosions.stl * 1 x SandClock.stl * 2 x Cubes.stl * 1 x Minis.stl * 1 x Dices.stl * 1 x Gems.stl * 1 x PinsTraps.stl * 1 x Spacer_R.stl * 1 x Spacer_L.stl The insert should be mounted in three columns, as shown in the pictures: 1. 8 CardBox stacked in two columns. 2. Stack PitStop + Climate + Explosions, with SandClock to its side. Then stack over them the two Cubes. 3. Minis and Dices, with Gems stacked over it and PinsTraps over Gems. The spacers fix the empty pace between the cardboard insert and the boxes. Not really necessary, but avoids risk of boxes moving. The boxes are designed to stack, but probably you will need to print them with good quality. Even if the tolerances don't let them stack properly, colums simply will be only between 0.8 and 1.6 mm higher (depending on the elements stacked), so it will not cause any problem. To do: Add some "grabbing feature" to the one slot trays to ease picking them from the box.
Statistics
Likes
2
Downloads
0