Simple universal filament spool holder (customizable)
Description
Part list: - 2x SKF 608zz bearing (Later I removed the shield. And cleaned the grease OFF. Used some oil. in this way spins way better.) - 2x OD 8mm aluminium Tube (9mm lenght for me) Print: No support needed. (Make sure the countersink hole is upwards) I inclouded the editable design file as well. If you want it to customize. Assembly: - Cut the tube for the desireable size. - Glue the bearings on to the aluminium tube - pop the shaft assembly in to the clips - I was adding countersink M5 thread. You can use it for mounting. Or connect the 2 side and give extra rigidity.
Statistics
Likes
0
Downloads
0