Anti backlash Nut adapter Ender 3/Other TR8 based printers No Z Height loss
Description
A anti backlash nut adapter for Ender 3 / Other Creality printers. This should fit many other TR8 based printers. Features: No Z height is lost. Orients the anti backlash nut in the correct orientation. Works with round anti backlash nuts, without needing to move extruder motor. Fits with a NEMA17 extruder motor sideways + 5mm (ie fits with a BMG extruder) This part can be printed support free (With decent bridging) It also still fits with 48mm or lifted z motors (Required for my Dual Z System) Assembly: Place m3 nuts into provided internal slots Place anti backlash nut main into position, screw it in with m3 hardware. Insert spring + secondary nut Screw into position on printer (hanging, flat side facing towards printer plate) Thread rod in from the top. This is part of my Ender 3 single stepper dual Z system. Find all parts here: https://www.thingiverse.com/thing:4583416 - Dual Z plate https://www.thingiverse.com/thing:4581014 - Fully adjustable Z rod mounts / stabilizers https://www.thingiverse.com/thing:4582645 - Belt tensioner Optional- https://www.thingiverse.com/thing:4581024 - Anti backlash adapter https://www.thingiverse.com/thing:4581042 - Lifted adjustable stepper mount The complete upgrade requires: 1x TR8x8 Leadscrew (or 2x TR8x1 or TR8x2 or TR8x4 leadscrews, depending on preference. I use TR8x1 for the highest resolution) 1x TR8 leadscrew nut or anti backlash nut (2 if changing both rods) 2x 608 bearings 2x Timing belt pulleys (I use 20mm/60 tooth pulleys, any size will work 1x timing belt (From 696mm to ~800mm, I use 752mm) M3 mounting hardware and T slot nuts.
Statistics
Likes
17
Downloads
0