Fireboard 2 Case and Stand
Description
This thing is actually four things all using the same core design for the Fireboard 2 device. 1) Hanger (only hangs from a hook, no table stand) (1 file to print) 2) Brick (only sits on a table top, no roof attachments) (1 file to print) 3) Hanging Brick (sits on table top or hangs from hook, no roof) (1 file to print) 4) Hut (only sits table top, has a roof that can be removed) (2 files to print) I recommend only printing in PETG, ASA, or ABS since the Fireboard typically resides outside, close to a grill. I've only used PETG. The "hut" and "brick" are just table top stands for the Fireboard 2. The hut is the same as the brick, however, it has a place for the roof to attach. The hanging brick and hanger both have a hole that matches the hook on my Kamado Joe Classic II. The roof is a separate file that attaches into the hut base. Printing the roof is likely the most challenging, I recommend the textured sheet if printing on a prusa.
Statistics
Likes
8
Downloads
0